This camera belongs to my twin brother. It was his first camera. At some point, he stopped using it because it got a light leak. I could not find the source of light. Anyways, I think I've fixed it with a light seal, but I've taken no pictures with it yet.
This might be one of my favorite cameras. The picture quality is great and it looks great.  


"All plastic construction"


Nah! that's not snake skin.

The camera case is made out of brown plastic.

A possible manufacturing date? If so, this camera was built on October 1959

Sticker on the inside. It's weird that it recomends the use of "agfacolor" since this camera is meant to be used with B/W film. The daylight filter is yellow and when color film is used, the resulting picture has a weird tint.

You can see in this picture the light leak on the middle of the top of the picture.

There is a small dent on the shutter body.


Imagen

The inside of the camera. I think the light is coming from between the lens mount and the body of the camera.


Imagen

I removed the four screws of the bottom plate.

Bottom plate removed.

Imagen

Two screws held the lens mount in place. I guess the light leak is coming from here.

Imagen

I removed the aluminum cover to fix the dent.

Imagen

I cleaned the lenses while they were out. To open the shutter, you have to remove the little screw that held the aluminum stripe on the bottom of the shutter and turn the cover 1/4 of a turn.

Reassembling the shutter.

I did a paper washer with very soft black construction paper

I flattened the borders of the paper to make a better seal.

The seal in place.It looks white because of the flash.